An effective indicator for defect detection in concrete structures by rotary hammering
Y. Hasebe, F. Kuratani, T. Yoshida, T. Morikawa
Vibration Engineering for a Sustainable Future Vol. 2 Chapter 28-(7) 2020年09月 査読有り
Influence of pulverized Material on vibration and sound characteristics of an operating ball mill
T. Ito, T. Yoshida, F. Kuratani
Vibration Engineering for a Sustainable Future Vol. 2 Chapter 13-(7) 2020年09月 査読有り
Snowboard simulation with distinct element method and finite element method
T. Yoshida, F. Kuratani, S. Nakamura
Vibration Engineering for a Sustainable Future Vol. 3 Chapter 6-(8) 2020年09月 査読有り
シンバルの音響特性に及ぼすベルサイズの影響
小川渉,鞍谷文保,吉田達哉,小出俊雄,水田泰次
日本機械学会論文集 86(881) 19-00237-(14) 2020年01月 査読有り
Vibration characteristics of an operating ball mill
T Yoshida, F Kuratani, T Ito, K Taniguchi
Journal of Physics: Conference Series 1264 012016-(9) 2019年07月 査読有り
Effect of contact area with fixture on dynamic behaviour of joint interface in ultrasonic welding of thermoplastics
F Kuratani, S Miyano, T Yoshida, S Washio
Journal of Physics: Conference Series 1264 012047-(11) 2019年07月 査読有り
シンバルの減衰特性に対する金属組織の影響
小川 渉,菖蒲敬久,筧瑞恵,鞍谷文保,
小出俊雄,文珠義之,水
田泰次
日本金属学会誌 83(4) 128-135 2019年04月 査読有り
Simulation of snowboarding on snow surface modelled with particle elements
T. Yoshida, A. Hojo, F. Kuratani
Proceedings of the 6th International Congress on Sport Sciences Research and Technology Support 23-26 2018年09月 査読有り
シンバル音の減衰に及ぼす転位密度の影響に関する研究
小川 渉, 鞍谷文保, 文珠義之, 小出俊雄, 菖蒲敬久, 佐藤眞直, 筧瑞恵, 長村光造
SPring-8/SACLA利用研究成果集 Section B 6(2) 345-347 2018年08月 査読有り
Evaluation of automated digging performance for hydraulic excavators
T. Hirano, T. Yoshida, N. Tsujiuchi, A. Ito, F. Kuratani, M. Tateishi, H. Andou
Proceedings of the 17th Asia Pacific Vibration Conference 140 2017年11月 査読無し
Vibration analysis of tumbling ball mill
Tatsuya Yoshida, Fumiyasu Kuratani, Tomonori Nakayama, Kento Taniguchi
Proceedings of the 17th Asia Pacific Vibration Conference 84 2017年11月 査読無し
Effect of sound quality adjustment process on the vibration characteristics of cymbals
K. Kitabayashi, F. Kuratani, T. Yoshida, W. Ogawa, M. Tao, T. Koide
Proceedings of the 17th Asia Pacific Vibration Conference 81 2017年11月 査読無し
油圧ショベルの操作コントローラ開発のための油圧システムの同定
吉田達哉, 辻内伸好, 伊藤彰人, 鞍谷文保, 安藤博昭, 青柳多慶夫, 村山栄治, 荒井邦晴
計測自動制御学会論文集 53(10) 557-563 2017年10月 査読有り
シンバルの振動特性に及ぼすハンマリング加工の効果
鞍谷 文保,北林 研人,小川 渉,吉田 達哉,長村 光造,小出 俊雄,文珠 義之,水田 泰次
日本機械学会論文集 83(851) No.17-00110-(12) 2017年07月 査読有り
静加圧力を考慮した超音波プラスチック溶接の動的接触解析
平居 嵩朗,鞍谷 文保,吉田 達哉,菊池 健,中山 久美子,鷲尾 宰司
設計工学 52(4) 261-272 2017年04月 査読有り
シミュレーションを用いた制御パラメータの掘削性能への影響評価
吉田 達哉,辻内 伸好,伊藤 彰人,鞍谷 文保,平野 貴司,安藤 博昭
設計工学 51(11) 821-836 2016年11月 査読有り
The correlation between the percussive sound and the residual stress/strain distributions in a cymbal
K.Osamura, F.Kuratani, T.Koide, W.Ogawa, H.Taniguchi, Y.Monju, T. Mizuta and T.Shobu
Journal of Materials Engineering and Performance 25 5323-5329 2016年11月 査読有り
Understanding the effect of hammering process on the vibration characteristics of cymbals
F.Kuratani, T.Yoshida, T.Koide, T.Mizuta and K.Osamura
Journal of Physics: Conference Series 744 012110-(11) 2016年09月 査読有り
Effect of an overlapping Region on Damping due to Friction in Joined Plate Structures
T.Hirai, F.Kuratani, T.Yoshida
Journal of Mechanical Engineering and Automation 6(5) 101-109 2016年07月 査読有り
Prediction of dynamic behavior of workpieces in ultrasonic plastic welding
T. HIRAI, F. KURATANI, T. YOSHIDA and S. WASHIO
Proceedings of 16th Asia Pacific Vibration Conference 837-843 2015年11月 査読有り
Efficiency examination of automatic digging for excavators on several conditions
T. Yoshida, N. Tsujiuchi, A. Ito, F. Kuratani, H. Andou
Proceedings of 16th Asia Pacific Vibration Conference 606-613 2015年11月 査読有り
モード合成法を用いた超音波プラスチック溶接の動的挙動予測
小出 一志,鞍谷 文保,平居 嵩朗,菊池 健,中山 久美子,鷲尾 宰司
設計工学 50(11) 593-601 2015年11月 査読有り
Vibration based bearing condition evaluation of highway bridges
B. Zhang, F. Kuratani, T. Yoshida
Proceedings of 2014 International Symposium on Advanced Mechanical and Power Engineering 140-144 2014年11月 査読無し
Damping estimation of joined plate structures using static contact analysis
T.Hirai, F.Kuratani, K.Koide, I.Kido
Proceedings of the 12th International Conference on Motion and Vibration(2A12) 42015 2014年08月 査読有り
部分的な重なりを有する平板接合構造の簡易減衰推定
平居 嵩朗, 鞍谷 文保, 小出 一志, 城戸 一郎
日本機械学会論文集 80(812) 42016 2014年05月 査読有り
RC-D14 試作レス実現のための振動・騒音CAE技術の高度化に関する研究分科会報告書
主査 鞍谷 文保
RC-D14 試作レス実現のための振動・騒音CAE技術の高度化に関する研究分科会報告書 2014年04月 査読無し
Structural Optimization of Subsystems to Realize Desired SEA Parameters
K.Kuroda, T.Yamazaki, F.Kuratani
Journal of System Design and Dynamics 7(4) 539-551 2013年12月 査読有り
シンバルの素材国産化および品種多様化への連携事業
水田 泰次, 水田 泰成, 文珠 義之, 小川 渉, 小出 俊雄, 鞍谷 文保, 長村 光造
素形材 54(12) 52-58 2013年12月 査読無し
Damping in joined friction plates with partially overlapping interfaces
F. Kuratani, T. Hirai, K. Koide, I. Kido
Proc. of 11th International Conference on Recent Advances in Structural Dynamics Paper No.1019 1-13 2013年07月 査読有り
Evaluation of friction damping in jointed plates with partially overlapping interfaces
F. Kuratani, K. Koide, T. Hirai, I. Kido
Proc. of the 15th Asia Pacific Vibration Conference 1079-1084 2013年06月 査読有り
所望のSEAパラメータを実現する要素形状の適正化
黒田 勝彦, 山崎 徹, 鞍谷 文保
日本機械学会論文集 C編 79(800) 1012-1023 2013年05月 査読有り
スポット溶接位置のばらつきが薄板構造物の振動特性に及ぼす影響
松原 和平, 鞍谷 文保, 鷲尾 宰司, 倉光 俊喜雄
日本機械学会論文集 C編 79(800) 1582-1593 2013年05月 査読有り
教材用2足歩行模型の構造パラメータを設定する教育方法
山田 哲也, 鞍谷 文保, 前田 浩司
日本産業技術教育学会誌 55(1) 35-42 2013年04月 査読有り
Influence of in-plane vibration on SEA model for flexural vibration on plate structures
K.Kuroda, T.Yamazaki, F.Kuratani
Journal of System Design and Dynamics 6(2) 227-239 2012年04月 査読有り
RC-D10 自動車を中心とした振動-騒音解析技術に関する研究分科会報告書
主査 鞍谷 文保
RC-D10 自動車を中心とした振動-騒音解析技術に関する研究分科会報告書 2012年04月 査読無し
Vibration measurement in non-rigid test environment with speckle interferometry
T.Matsumoto, H.Nakamoto, Y.Takizawa, Y.Kitagawa, F.Kuratani, K.Koyama, M.Adachi
Proceedings of 22nd General Congress of the international Commission for Optics 8011 80117M-1 2011年08月
Finite element model for spot welds using multi-point constraints and its dynamic characteristics
F.Kuratani, K.Matsubara, T.Yamauchi
SAE Int. J. of Passeng. Cars ? Mech. Syst. 4(2) 1311-1319 2011年08月 査読有り
Finite element model for spot welds using multi-point constraints and its dynamic characteristics
F.Kuratani, K.Matsubara, T.Yamauchi
Proceedings of SAE 2011 Noise and Vibration Conference and Exhibition 2011-01-1697 2011年05月 査読有り
多点拘束を利用したスポット溶接部の簡易モデルとその動的特性
鞍谷 文保, 山内 貴士
日本機械学会論文集 C編 77(777) 1748-1758 2011年05月 査読有り
Modal filter for a disk and its application to the evaluation of the tensioning effect on circular saws
F.Kuratani, S.Oda
Journal of System Design and Dynamics 5(2) 332-343 2011年03月 査読有り
Finite element modeling of spot welds for vibration analysis
F.Kuratani, M. Okuyama, T. Yamauchi, S. Washio
Proceedings of 5th Asian Conference on Multibody Dynamics 2010 2010年08月
任意の接続角度を有するはりの面外振動のSEAモデルに及ぼす面内振動の影響
黒田 勝彦, 山崎 徹, 鞍谷 文保
日本機械学会論文集 C編 76(766) 1462-1469 2010年06月 査読有り
円板用モードフィルタとその丸のこ腰入れ評価への適用
鞍谷 文保, 織田 慎平
日本機械学会論文集 C編 76(765) 1280-1286 2010年05月 査読有り
有限要素モデリング精度向上技術の検討
鞍谷 文保
RC-D5 自動車を中心とした振動-騒音解析技術に関する研究分科会報告書 2010年04月 査読無し
RC-D5 自動車を中心とした振動-騒音解析技術に関する研究分科会報告書
主査 鞍谷 文保
RC-D5 自動車を中心とした振動-騒音解析技術に関する研究分科会報告書 2010年04月 査読無し
Modeling of spot welds for vibration analysis
T.Yamauchi, F.Kuratani
Proceedings of 2009 International Symposium on Advanced Mechanical and Power Engineering 2009年11月 査読無し
Structural modification with mode shape expansion for rib stiffeners
F.Kuratani
Proceedings of 2009 International Symposium on Advanced Mechanical and Power Engineering 2009年11月 査読無し
日本機械学会誌機械工学年鑑 第13章機械力学・計測制御 第4節モード解析
鞍谷 文保
日本機械学会誌 112(1089) 51-52 2009年08月 査読無し
The method of application of SEA in structural design process for reducing structure-borne noise in machinery Part2: Structural optimization of subsystems
K.Kuroda, F.Kuratani, T.Yamazaki
Mechnics 28(3) 76-82 2009年01月 査読有り
平板構造物の面外振動のSEAモデルに及ぼす面内振動の影響
黒田 勝彦, 山崎 徹, 鞍谷 文保
日本機械学会論文集(C編) 74(744) 1955-1962 2008年08月 査読有り
An Analysis Method for Fuzzy Natural Frequency using Response Surface Methodology
F.Kuratani, S.Ishizuka, S.Washio
Journal of System Design and Dynamics 2(1) 64-75 2008年03月 査読有り
Structural Optimization of Subsystems to Realize Sesired SEA Parameters
K.Kuroda, T.Yamazaki, F.Kuratani
Proceedings of Inter-noise 2008: The 37th International Congress and Exposition on Noise Control Engineering No.578 2008年01月
Influences of In-plane Vibration on SEA Models for Plate Structures
K.Kuroda, T.Yamazaki, F.Kuratani, S.Oono
Proceedings of Inter-Noise 2007: The 36 International Congress and Exhibition on Noise Control Engineering Paper No.014 2007年08月
Development of Bipedal Walking Model as Teaching Material
T.Yamada, F.Kuratani
Proceedings of International Technology Education 2007 155-161 2007年06月
Development of Filter Fan Impeller with both Functions of Fan and Filter -Effect of Impeller Profile on Filtration and Noise-
Y.Fukuda, T.Ogawa, F.Kuratani, Y.kinoshita
Journal of Environment and Engineering 2(2) 371-380 2007年04月 査読有り
教材用2足やじろべえ型受動歩行模型の運動解析
松永 泰弘, 中村 玄輝, 山田哲也, 鞍谷 文保
日本産業技術教育学会誌 49(3) 205-211 2007年01月 査読有り
Noise Reduction of a Leaser Printer using SEA and FEM
A.Mori, T.Yamazaki, K.Kuroda, F.Kuratani
Proceedings of ISMA2006 International Conference on Noise and Vibration Engineering 2267-2274 2006年09月
空気清浄機用ハイブリットファンの開発
鞍谷 文保, 福田 芳行,小川 武範,山野 惟夫
産業技術短期大学誌 40 13-29 2006年08月 査読無し
日本機械学会誌機械工学年鑑 第13章機械力学・計測制御 第4節モード解析
鞍谷 文保
日本機械学会誌 109(1053) 51-52 2006年08月 査読無し
A Method to Separate Resistance due to a Transom Stern from Measured Residual Resistance
T.Yamano, Y.Kusuniki, F.Kuratani, T.Ogawa, T.Ikebuchi, I.Funeno
Proc. of 9th International Marine Design Conference 585-597 2006年05月 査読有り
手づくり楽器の開発 -塩ビパイプ製リコーダー-
鞍谷 文保
和歌山大学教育学部紀要-自然科学-(56) 35-39 2006年02月 査読無し
Structural Modification with Mode Shape Expansion for Rib Stiffeners
F.Kuratani, T.Shimada, T.Yamano, T.Ogawa
JSME International Journal SeriesC 49(3) 771-778 2006年01月 査読有り
小・中学校におけるものづくり教材としての2足歩行模型に関する研究
山田 哲也, 鞍谷 文保
日本産業技術教育学会誌 47(3) 193-199 2006年01月 査読有り
Using a Balancing Toy Pendulum for Teaching Rigid Body Dynamics
T.Yamada, F.Kuratani
Proc. of the International Conference Technology Education 2006 198-203 2006年01月 査読有り
Development of a Wave-less Transom Stern
T.Yamano, Y.Kusunoki, F.Kuratani, T.Ogawa, T.Ikebuchi, I.Funeno
Proc. of 4th International Workshop on Ship Hydrodynamics 128-134 2005年09月
送風および集塵機能を併せ持つフィルタファン用羽根車の開発 -集塵性能および騒音性能に及ぼす羽根車形状の影響-
福田 芳行, 小川 武範, 鞍谷 文保, 木下 凱文
日本機械学会論文集(B編) 71(708) 2067-2074 2005年08月 査読有り
モード拡張法を組み込んだ補強リブ構造変更シミュレーション
鞍谷 文保, 島田 哲夫, 山野 惟夫, 小川 武範
日本機械学会論文集(C編) 71(710) 2928-2934 2005年01月 査読有り
動力学学習教材としてのやじろべえ型振り子の開発
山田 哲也, 鞍谷 文保
日本産業技術教育学会誌 47(3) 193-199 2005年01月 査読有り
Structural Modification Procedure with Mode Shape Expansion for Rib Stiffener Locations
F.Kuratani, S.Shimada, T.Yamano, T.Ogawa, S.Washio
Proc. of ISMA 2004 1859 2004年09月
A Consideration on Transom Stern Form Design
山野 惟夫, 楠 芳一, 鞍谷 文保, 小川 武範, 池淵 哲朗, 船野 功
関西造船協会誌(242) 42012 2004年09月 査読有り
Structural Modification for Rib Stiffener Location
F.Kuratani, T.Yamano, T.Ogawa, S.Washio
Proc. of the 10th Asia-Pacific Vibration Conference 343 2003年11月 査読有り
Effect of Transom Stern Bottom Profile Form on Stern Wave Resistance -A Considerration on the Effect of Real Stern End Immersion-
山野 惟夫, 楠 芳一, 鞍谷 文保, 小川 武範, 池淵 哲朗, 船野 功
関西造船協会誌(240) 42327 2003年09月 査読有り
On the Effect of Bottom Profile of a Transom Stern on its Stern Wave Resistance
T.Yamano, Y.Kusunoki, F.Kuratani, T.Ogawa, I.Funeno
Proc. of 8th International Marine Design Conference 81-93 2003年05月 査読有り
Effect of Transom Stern Bottom Profile Form on Stern Wave Resistance -An Experimental Study-
山野 惟夫, 楠 芳一, 鞍谷 文保, 小川 武範, 池淵 哲朗, 船野 功
関西造船協会誌(239) 42014 2003年03月 査読有り
シエル要素でモデル化された補強リブの構造変更シミュレーション
鞍谷 文保,山野 惟夫,小川 武範
日本機械学会論文集(C編) 68(676) 2002年12月 査読有り
A Method to Confirm Scale Effect of Stern Waves due to a Transom Stern
山野 惟夫, 楠 芳一, 鞍谷 文保, 小川 武範,池淵 哲朗,船野 功
関西造船協会誌(237) 42011 2002年03月 査読有り
有限要素法によるローラ腰入れされた円板の振動解析(初期応力剛性行列と固有振動数の簡易推定法)
鞍谷 文保,矢野 澄雄,山野 惟夫,小川 武範
日本機械学会論文集(C編) 68(665) 2002年01月 査読有り
技術教育教材としての模型飛行機に関する研究 副題-設計方法について-
鞍谷 文保
日本産業技術教育学会誌 43(1) 15-25 2001年03月 査読無し
An Efficient Method to Estimate Natural Frequencies of Roll-Tensioned Disks
F.Kuratani, S.Yano, T.Yamano
Proc. of the 19th International Model Analysis Conference 282 2001年02月
Vibration Analysis of a Circular Disk Tensioned by Rolling using Finite Element Method
F.Kuratani, S.Yano
Archive of Applied Mechanics (Springer Verlag) 70(4) 279-288 2000年05月 査読有り
On Scale Effect of the Resistance Due to Wave Breaking Just Behind a Transom Stern
T.Yamano, H.Hibino, F.Kuratani
Proc. of 7th International Marine Design Conference Marine Design Conference 567-577 2000年05月 査読有り
丸のこの最適ローラ腰入れ条件の探索法
鞍谷 文保,山野 惟夫
日本産業技術教育学会誌 42(3)(109) 2000年01月 査読有り
多翼ファンの性能改善に関する研究(サクションコーンの影響)
山本 成敏, 鞍谷 文保, 小川 武範
日本機械学会論文集(B編) 65(635) 2406 1999年07月 査読有り
有限要素法によるローラ圧延された円板の振動解析
鞍谷 文保,矢野 澄雄,岩壺 卓三,沖田 耕三
日本機械学会論文集(C編) 65(63) 857 1999年03月 査読有り
Suppression Phemomena in Piecewise Linear Systems Subjected to Asynchronous Excitations and Practical Problems on Tensioning of Samblades(共著)
S.Yano, F.Kuratani
The 8th Japanese-German Seminar on Nonlinear Problems in Dynamical Systems -Theory and Applications- 35 1998年01月
スポーツ用具のダイナミクスと実験モード解析(テニスラケットの感度解析および構造変更)
矢野 澄雄, 鞍谷 文保, 安東 隆志
神戸大学発達科学部研究紀要 5(1) 163 1997年01月 査読無し
Estimation of Rotational Degrees of Freedom Components of Experimental Mode Shapes Using Analytical Model
F.Kuratani, T.Iwatsubo, S.Yano, K.Okita
Proc. of Acoustical Society of America and Acoustical Society of Japan 3rd Joint Meeting 765 1996年12月
数値解析の援用による回転自由度モードの推定(重ね合せるモードの選択に関する検討)
鞍谷 文保, 岩壺 卓三,沖田 耕三
日本機械学会論文集(C編) 62(603) 4205 1996年11月 査読有り
振動系同定法の収束性向上に関する検討
鞍谷 文保
日本機械学会逆問題の計算力学的手法に関する調査研究分科会成果報告書 103-107 1996年02月 査読無し
有限要素法を用いた丸のこの応力解析と振動特性に基づく腰入れの評価
矢野 澄夫, 鞍谷 文保
神戸大学発達科学部研究紀要 4(1) 69 1996年01月 査読無し
数値解析の援用による回転自由度モードの推定
鞍谷 文保, 岩壺 卓三,沖田 耕三
日本機械学会論文集(C編) 61(587) 2875 1995年07月 査読有り
機械機能と円板要素のモーダルアナリシス
矢野 澄夫, 鞍谷 文保
神戸大学発達科学部研究紀要 2(2) 271 1995年06月 査読無し
プリント配線板の固有振動数の最適化
安東 隆志,一森 和之, 鞍谷 文保
兵庫県立工業技術センター研究報告書(4) 27 1995年03月 査読無し
A Method for Improving the Convergence of Identification of Vibration Systems
F.Kuratani, T.Iwatsubo, K.Okita
Proc. of the 12th International Modal Analysis Conference 105 1994年02月
GFRP多層プリント配線板用基材の振動解析(境界条件の影響)
一森 和之, 鞍谷 文保, 元木 信弥,福田 武人
日本複合材料学会誌 20(2) 79 1994年02月 査読有り
感度解析を用いた振動系のパラメータ同定(収束性の改善に関する検討)
鞍谷 文保, 岩壺 卓三,沖田 耕三
日本機械学会論文集(C編) 57(533) 9 1991年01月 査読有り
感度解析を用いた柔軟付属物を有する剛体のパラメータ同定
鞍谷 文保, 岩壺 卓三,沖田 耕三
日本機械学会論文集(C編) 56(528) 2092 1990年08月 査読有り
感度解析を用いた振動システムの同定(第4報 減衰持性を有する弾性体で支持された剛体系への適用)
鞍谷 文保, 藤川 猛,沖田 耕三
日本機械学会論文集(C編) 55(512) 840 1989年04月 査読有り
感度解析を用いた振動システムの同定(第3報 ばねで支持された剛体系への適用 その2)
鞍谷 文保, 藤川 猛,沖田 耕三
日本機械学会論文集(C編) 54(506) 2422 1988年01月 査読有り
感度解析を用いた振動システムの同定(第2報 ばねで支持された剛体系への適用)
鞍谷 文保, 藤川 猛,沖田 耕三
日本機械学会論文集(C編) 53(487) 524 1987年03月 査読有り
低周波振動ドリル加工時に生成されるバリに関する研究(アルミニウムの穴あけの場合)
足立 勝重,新井 典久, 鞍谷 文保, 沖田 耕三,脇坂 彰一
精密工学会誌 52(7) 1205 1986年07月 査読有り
感度解析を用いた振動システムの同定(第1報 解析方法の説明と基礎的検討)
藤川 猛,新田 勝,沖田 耕三, 鞍谷 文保
日本機械学会論文集(C編) 52(476) 1224 1986年04月 査読有り
A Study on Burr in Low Frequency Vibration Drilling
K.Adachi, N.Arai, K.Okita, S.Wakisaka, F.Kuratani
Proc. of the 5th Fnternational Conference on Production 246 1984年07月
油圧ショベルの操作コントローラ開発のための油圧システムの同定
吉田 達哉, 辻内 伸好, 伊藤 彰人, 鞍谷 文保, 安藤 博昭, 青柳 多慶夫, 村山 栄治, 荒井 邦晴
計測自動制御学会論文集 53(10) 557-563 2017年10月 査読有り
Evaluation of automated digging performance for hydraulic excavators
T. Hirano, T. Yoshida, N. Tsujiuchi, A. Ito, F. Kuratani, M. Tateishi, H. Andou
Proceedings of the 17th Asia Pacific Vibration Conference 140 2017年11月 査読無し
Vibration analysis of tumbling ball mill
Tatsuya Yoshida, Fumiyasu Kuratani, Tomonori Nakayama, Kento Taniguchi
Proceedings of the 17th Asia Pacific Vibration Conference 84 2017年11月 査読無し
Effect of sound quality adjustment process on the vibration characteristics of cymbals
K. Kitabayashi, F. Kuratani, T. Yoshida, W. Ogawa, M. Tao, T. Koide
Proceedings of the 17th Asia Pacific Vibration Conference 81 2017年11月 査読無し
Simulation of snowboarding on snow surface modelled with particle elements
T. Yoshida, A. Hojo, F. Kuratani
Proceedings of the 6th International Congress on Sport Sciences Research and Technology Support 23-26 2018年09月 査読有り
Effect of contact area with fixture on dynamic behaviour of joint interface in ultrasonic welding of thermoplastics
F Kuratani, S Miyano, T Yoshida, S Washio
Proceedings of the XIII International Conference on Recent Advances in Structural Dynamics 198-208 2019年04月 査読有り
Vibration characteristics of an operating ball mill
T Yoshida, F Kuratani, T Ito, K Taniguchi
Proceedings of the XIII International Conference on Recent Advances in Structural Dynamics 824-832 2019年04月 査読有り
シンバルの音響特性に及ぼすベルサイズの影響
小川渉, 鞍谷文保, 吉田 達哉, 小出俊雄, 水田泰次
日本機械学会論文集 86(881) 19-00237 2020年01月 査読有り
Vibration characteristics of an operating ball mill
T Yoshida, F Kuratani, T Ito, K Taniguchi
the XIII International Conference on Recent Advances in Structural Dynamics 2019年04月
Effect of contact area with fixture on dynamic behaviour of joint interface in ultrasonic welding of thermoplastics
F Kuratani, S Miyano, T Yoshida, S Washio
the XIII International Conference on Recent Advances in Structural Dynamics 2019年04月
Simulation of snowboarding on snow surface modelled with particle elements
T. Yoshida, A. Hojo, F. Kuratani
the 6th International Congress on Sport Sciences Research and Technology Support 2018年09月
Effect of sound quality adjustment process on the vibration characteristics of cymbals
K. Kitabayashi, F. Kuratani, T. Yoshida, W. Ogawa, M. Tao, T. Koide
the 17th Asia Pacific Vibration Conference 2017年11月
Vibration analysis of tumbling ball mill
Tatsuya Yoshida, Fumiyasu Kuratani, Tomonori Nakayama, Kento Taniguchi
the 17th Asia Pacific Vibration Conference 2017年11月
Evaluation of automated digging performance for hydraulic excavators
T. Hirano, T. Yoshida, N. Tsujiuchi, A. Ito, F. Kuratani, M. Tateishi, H. Andou
the 17th Asia Pacific Vibration Conference 2017年11月
振動モードに基づくシンバル放射音の特性解析
川井 徹平, 鞍谷 文保, 吉田 達哉, 桝本 貴之
日本機械学会北陸信越支部第52期総会・講演会 2015年03月 選考無し 0
平板接合構造の周波数領域モデリング
平居 嵩朗, 鞍谷 文保, 泉代 将太
日本機械学会北陸信越支部第52期総会・講演会 2015年03月 選考無し 0
振動データを用いた橋梁支承モニリングに関する基礎的検討
雷 軍平, 鞍谷 文保
日本機械学会北陸信越支部第52期総会・講演会 2015年03月 選考無し 0
粒状体-構造体連成シミュレーョンのための強連成解析手法の提案
形浦 成則, 吉田 達哉, 鞍谷 文保
日本機械学会北陸信越支部第52期総会・講演会 2015年03月 選考無し 0
シンバルの振動モードとその音響放射効率
石原匡,鞍谷文保,吉田達哉,川井徹平
日本設計工学会北陸支部平成27年度研究発表講演会 2015年06月
超音波プラスチック溶接における接合部品の動的挙動予測
長谷川武志,平居嵩朗,鞍谷文保,吉田達哉,鷲尾宰司
日本設計工学会北陸支部平成27年度研究発表講演会 2015年06月
ハンマリング加工がシンバルの振動特性に及ぼす影響
川井徹平,鞍谷文保,吉田達哉,石原匡
Dynamics and Design Conference 2015 2015年08月
打撃検査によるコンクリート構造物の欠陥評価(実験的検討)
朱偉華,鞍谷文保,吉田達哉,磯雅人,毛利茂則,南出重克
日本機械学会北陸信越支部第53期総会・講演会 2016年03月
打撃検査によるコンクリート構造物の欠陥評価(有限要素解析による検討)
松本浩明,鞍谷文保,吉田達哉,磯雅人,毛利茂則,南出重克
日本機械学会北陸信越支部第53期総会・講演会 2016年03月
コンクリートの欠陥検知に適した回転式打撃条件の検討
森川大河, 鞍谷文保, 吉田達哉, 吉見真
Dynamics and Design Conference 2018 2018年08月
個別要素法を用いたスノーボードの滑走シミュレーション手法の開発
北條 陽大,吉田 達哉,鞍谷文保
Dynamics and Design Conference 2018 2018年08月
コンクリート欠陥検知におけるインパクト打撃法と回転式打撃法の比較
森川大河,吉見真,鞍谷文保,吉田達哉
日本機械学会北陸信越支部 第56期総会・講演会 2018年03月 選考無し
伝達関数合成法を用いた工作機械の振動解析
山本匠悟, 笹嶋隆志, 鞍谷文保, 吉田達哉
日本機械学会北陸信越支部 第56期総会・講演会 2018年03月 選考無し
粉砕物の粒子径と材質がボールミル壁面の振動・放射音に及ぼす影響
伊藤拓矢, 吉田達哉, 鞍谷文保
日本設計工学会北陸支部令和元年度研究発表講演会 2019年06月 選考無し 日本設計工学会北陸支部
不燃性照明カバー用複合材料の強度・振動解析
宮野竣介, 鞍谷文保, 吉田達哉, 谷口祥治, 山田昌徳, 帰山千尋, 山口太一, 伊與寛史, 松井多志
日本設計工学会北陸支部令和元年度研究発表講演会 2019年06月 選考無し 日本設計工学会北陸支部
回転式打撃法を用いたコンクリートの打音検査と欠陥評価指標
長谷部友弥, 鞍谷文保, 吉田 達哉, 森川大河
日本設計工学会北陸支部令和元年度研究発表講演会 2019年06月 選考無し 日本設計工学会北陸支部
個別要素法を用いたスノーボードの滑走シミュレーションの検証
中村匠吾, 吉田達哉, 鞍谷文保
スポーツ工学・ヒューマンダイナミクス2019 2019年10月 選考無し 日本機械学会
Influence of Pulverized Material on Vibration and Sound Characteristics of an Operating Ball Mill
T Ito, T Yoshida, F Kuratani
Asian Pacific Vibration Conference 2019 2019年11月 選考有り
An Effective Indicator for Defect Detection in Concrete Structures by Rotary Hammering
Y Hasebe, F Kuratani, T Yoshida, T Morikawa
Asian Pacific Vibration Conference 2019 2019年11月 選考有り
Applicability of Automated Digging Algorithm on Slope Ground for Hydraulic Excavators
T Hirano, T Yoshida, N Tsujiuchi, A Ito, F Kuratani, H Andou
Asian Pacific Vibration Conference 2019 2019年11月 選考有り
Snowboard Simulation with Distinct Element Method and Finite Element Method
T Yoshida, F Kuratani, S Nakamura
Asian Pacific Vibration Conference 2019 2019年11月 選考有り
Hydraulic Control Design for Digging Trajectory Tracking of Scale Model Excavator
T Hirano, A Ito, N Tsujiuchi, A Ito, T Yoshida, F Kuratani, H Andou
Asian Pacific Vibration Conference 2019 2019年11月 選考有り